Bluetooth wireless communication kit for 2 way radios
Product Code: G6630B24BD3DE7
Reward Points: 0
Availability: 399
Reward Points: 0
Availability: 399
Price: $59.95
5 or more $56.80
20 or more $54.50
20 or more $54.50
This is a full duplex bluetooth voice communication kit for 2 way radios. A wired headset is connected with the biggest board (TSA5003). Another board TSA5004 is connected with the 2 way radio. The smallest module is the wireless PTT button.
TSA5004 slave module
TSA5004 module audio interface is a 4 pins 2.54mm pin space XH connector. MIC pin is microphone input. SPK1 and SPK2 are speakers output. Power input range: DC3.3V-6V. You need connect the headset's mic and speakers with TSA5004.
MFB button:
- Long press 5 seconds turn TSA5004 ON/OFF.
- Double click into searching mode. It will automatically search Bluetooth Master device.
TSA5003 Master module
MFB button:
- Long press 5 seconds turn TSA5003 ON/OFF.
- Double click into searching mode. It will auto searching Bluetooth slave device.
How to use?
- Connect your headset speaker/microphone to TSA5003 board. TSA5004 connect with mobile radio and all 3 modules get powered.
- Keep your TSA5003 and TSA5004 within 5 meters.
- Turn on your TSA5004 module (press the MFB button about 5 seconds). Please make sure there are no other Bluetooth slave devices nearby(Bluetooth amplifier, Bluetooth headset, Bluetooth receiver ect...).
- Turn on your TSA5003 bluetooth transmitter, press the MFB button about 5 seconds, Then double click the MFB button->blue and red LED light fast blink. now transmitter is in pairing mode and search receiver device automatically, finish pairing and connecting.
- Double click the MFB button on TSA5004.
- After connecting successfully. the blue LED on TSA5003 will stay on.
- Your voice can now be sent to the radio wirelessly. You can also receive voice from the radio.
Features:
- Bluetooth v5.3
- aptX, aptX-HD, SBC and AAC
- Bluetooth protocol: A2DP
- Output power: ClassII
- Effective transmission distance: 80-100m
Shipping list:
- 1 x TSA5003 Master module
- 1 x TSA5004 Slave module
- 1 x PTT button module
- 2 x Antenna
- 1 x JST XH Jumper 2 Wire -2.54mm
- 3 x JST XH Jumper 4 Wire -2.54mm
- 1 x JST XH Jumper 5 Wire -2.54mm
- 2 Mirco USB cables
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: