Categories

TOSR08-D - 8 Channel USB/Wireless 5V Timer Relay Module

TOSR08-D - 8 Channel USB/Wireless 5V Timer Relay Module
TOSR08-D - 8 Channel USB/Wireless 5V Timer Relay Module
Product Code: G5215C536E1113
Reward Points: 0
Availability: 927
Price: $45.00

5 or more $43.00
20 or more $39.00
   - OR -   

Description:

This is a USB/Wireless Timer Relay Module, It allows computer control switching of external devices by using the USB port of your computer!

Meanwhile, It  has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, which mean now you can control your device by zigbee or Bluetooth or WiFi !

The TOSR08-D module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.

It's also support delay timer function. You can set each relay output delay from 0 second - 24 hours.

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

A full datasheet for the relays used on the TOSR08-D is here: G5LA datasheet

If you use DC Power ,the Input voltage should be DC5V.

First Step - Install the Driver
The TOSR08-D module uses FT232RL USB to UART chip . Before using the TOSR08-D you will need to download the FT232RL Driver.

Connect the TOSR08-D and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TOSR08-D will now appear as a com port.

Commands
The TOSR08-D operates with an easy to use command set as described in the table below.

TOSR08-D Baud rate : 9600 

Test program
To get the TOSR08-D up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

 

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024