TOSR02-T - 2 Channel USB/Wireless 5V Relay Module (Temperature Sensor Support )
Reward Points: 0
Availability: 812
20 or more $21.00
Description:
First,this USB/Wireless Relay Module allows computer control external devices ON/OFF via the computer USB port..
Furthermore, It has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, that mean now you can control your device via zigbee or Bluetooth or WiFi !
The TOSR08-T module can powered by USB bus or DC power and provides four volt free contact relay outputs with a current rating of up to 10 Amp each.
It provides a DS18B20 temperature sensor port. You can use it make thermostat or any other similar application and so on.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the TOSR02 is here: G5LA datasheet
If you use DC Power ,the Input voltage should be DC5V.
First Step - Install the Driver
The TOSR02-T module uses FT232RL USB to UART chip . Before using the TOSR02-T you will need to download the FT232RL Driver.
Connect the TOSR02-T and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR02-T will now appear as a com port.
Commands
The TOSR02-T operates with an easy to use command set as described in the table below.
TOSR02-T Baud rate : 9600
Test program
To get the TOSR02-T up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Bluetooth control
WIFI control
Documents:
Controlling a TOSR0x USB Relay Module Using Python (Thanks James!)
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
