TOSR180 - 8 Channel USB/Wireless 5V Relay - (Password/Momentary/Latching)

Brand: Tinysine
Product Code: G5697107B5B00F
Reward Points: 0
Availability: 787

Price: $36.95

5 or more $33.50
20 or more $30.00

Qty: Add to Cart

- OR -

Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0) Related Products (8)

Description:

TOSR180 is an upgraded version of TOSR08. It supports password. It can be set to latching or momentary outputs. TOSR180 allows computer control switching of external devices by using the USB port of your computer. It also has a wireless extension port, can works with Xbee or BluetoothBee or WiFibee Module, So you can control your device via zigbee or Bluetooth or WiFi!

The TOSR180 provides four volt free contact relay outputs with a current rating of up to 10Amp each. one DS18B20 temperature sensor port. The module is powered from a 5VDC power supply. The DC input jack is 2.1mm with positive core polarity, The relays are SPDT types. If you want power it with DC12V or 24V, you just need a 12V/24V-5V DC converter.

Note: Relay board default password is: 123456

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

A full datasheet for the relays used on the TOSR180 is here: G5LA datasheet

If you use DC Power ,the Input voltage should be DC5V.

First Step - Install the Driver
The TOSR180 module uses FT232RL USB to UART chip . Before using the TOSR180 you will need to download the FT232RL Driver.

Connect the TOSR180 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TOSR180 will now appear as a com port.

Commands
The TOSR180 operates with an easy to use command set as described in the table below.

TOSR180 Baud rate : 9600

Test program
To get the TOSR180 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.