TOSR08-T - 8 Channel Smartphone Relay Bluetooth Remote Control Kit - DS18B20
Reward Points: 0
Availability: 969
20 or more $55.00
This is a WIFI Relay remote control kit. Including
1x 8 Channel USB/Wireless Relay Module (Temperature Sensor Support )
1x BluetoothBee Wireless module
1x Water proof DS18B20
1x Mini usb cable
You can easily control this relay module by your computer using Bluetooth.
We also provide a FREE android App TOSR Bluetooth. You can control your device by your phone very easily.
You can download it Here: TOSR Bluetooth
Description:
This USB/Wireless Relay Module allows computer control switching of external devices by using the USB port of your computer!
Meanwhile, It has a wireless extension port, can work with XBEE or Bluetooth Bee or Wifly Module, which mean now you can control your device by zigbee or Bluetooth or WiFi !
The TOSR08-T module powered by DC 5V power supply and provides four volt free contact relay outputs with a current rating of up to 10 Amp each. It also has a DS18B20 temperature sensor port. You can use it make your thermostat or any other similar application by yourself.
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the TOSR08 is here: G5LA datasheet
First Step - Install the Driver
The TOSR08-T module uses FT232RL USB to UART chip . Before using the TOSR08-T you will need to download the FT232RL Driver.
Connect the TOSR08-T and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR08-T will now appear as a com port.
Commands
The TOSR08-T operates with an easy to use command set as described in the table below.
TOSR08-T Baud rate : 9600
Test program
To get the TOSR08-T up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Bluetooth control
WIFI control
Documents:
- User Manual
- G5LA datasheet
- FT232RL Driver
- Test Program
- Realterm serial debug tool
- Controlling a TOSR0x USB Relay Module Using Python (Thanks James!)
- Linux Python module
- Control it from PC via Bluetooth
- iPhone APP (Bluetooth)
- Android APP(Bluetooth BLE) (You need turn on the GPS on Android 10 or newer version guide video)
- Android APP(Bluetooth)
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
