2 x 100W Bluetooth+DSP Audio Amplifier Board - TSA8802B(Apt-X)

Brand: Tinysine
Product Code: G650AA4AA6E010
Reward Points: 0
Availability: 500

Price: $59.95

5 or more $56.50
20 or more $53.20

Available Options

* Firmware type:

Qty: Add to Cart

- OR -

Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0) Related Products (9)

TSA8802B 2x100W 2 channels Bluetooth+DSP amplifier board with an AudioB I2S Bluetooth module that supports Apt-X. TSA8802B is a very flexible DSP/DAC/Amplifier combination board. It has perfect class-D structure (Based on TPA3221) and 2 channels have 100W power output. All the channels are capable of outputting nominal power simultaneously and continuously. This board can be powered by any DC12V-30V power supply. It can be used to drive any 2Ω~8Ω passive speakers.

It's a 2 channels amplifier board. You can pair it with a mobile phone or a computer (etc). Power the amplifier board. Use your phone or PC (etc) to search for a new Bluetooth device. The module will appear as "TSA8802B". You don't need a PIN, pair it and then you can play music.

The highlight point is ADAU1701 DSP chip on board. It has a default DSP program loaded. Customers can adjust the gain, bass, midrange and treble in the DSP program. It also has a debug port for Sigima Studio and user can program this module with our USBi programmer to get more functions that include equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, etc. TSA8802B has Apt-X and TWS supported. Therefore, Users can stream audio to 2 paired amplifier boards at the same time wirelessly.

External Button port:

There are 3 buttons on the board that can control the audio volume and play/pause ect... You can connect external buttons easily by using these button control ports.

Pins define:(Check the board backside silkscreen):

P/P: Play pause button
VOL+: volume increase and forward button
VOL-: volume decrease and rewind button
VDD_BT_IO: AudioB I2S 1.8V output

Volume control POT port:

There is an Ext POT port on the board. You can connect external POTs (5K~20K) to control the Main volume,treble,middle and Bass. You need to update the DSP program first. DSP program (with external POTs). This is our POT kit

ADC0- Main volume.
ADC1- Bass volume.
ADC2- Middle volume.
ADC3- treble volume.

DSP programming port:

User can load a new DSP program by using the USBi JTAG Sigma DSP programmer

The default DSP program can automatically select the Line in /Bluetooth audio and output to the amplifier chips. Bluetooth audio signal has a higher priority.

2 boards work in TWS mode. You can also build a wireless subwoofer system.

S1 - Long press 3s into pairing mode. Long press 6s clear the pairing info.
S1+S2 - Long press 1s into TWS slave mode.
S1+S3 - Long press 1s into TWS master mode.
S2+S3 - Long press 1s disconnect TWS connection.

Specification:

Specifications typical @ +25℃, Powered by 24V DC, unless otherwise noted. Specifications subject to change without notice.

Parameter	Condition	Min	Typ	Max
Supply Voltage (VDC)	-	10	24	30
Power output per channel	RL= 3Ω, 10% THD+N		112W
	RL= 4Ω, 10% THD+N		105W
	RL= 3Ω, 1% THD+N		100W
	RL= 4Ω, 10% THD+N		88W
	200W channel: RL= 2Ω, 1% THD+N		208W
THD+N	1W		0.02%
SNR	A-weighted,Gain= 18 dB		108dB
DNR	A-weighted,Gain= 18 dB		109dB
Minimum Load Impedance		3Ω	4Ω
Gain		18dB	24dB	34dB
Efficiency	100W @ 4Ohm		90%
Input Impedance	18dB		48KΩ
	24dB		24KΩ
	30dB		12KΩ
	34dB		7.7KΩ