Categories

TSA1701 Audio DSP Board

TSA1701 Audio DSP Board
TSA1701 Audio DSP Board TSA1701 Audio DSP Board TSA1701 Audio DSP Board
Brand: Tinysine
Product Code: G5EF96AFBE84AB
Reward Points: 0
Availability: 695
Price: $21.20

5 or more $20.50
20 or more $20.00
   - OR -   

The TSA1701 is a complete audio digital signal processing module. The main DSP chip on this module is ADAU1701. The application range is active loudspeaker concepts (digital 3 way 3 unit, 2 way 2 unit crossover, bass enhancement, etc.) and  transformation from 2.0 to 2.1 is realized. It also has four potentiometers and with default program loaded. Customers can adjust the gain, bass, midrange and treble.
It also has a debug port for Sigima Studio, and user can program this module with our USBi programmer to get more functions that include equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, etc.

 

 

Pins define:

Port name Pin name Direction Description
External Potentiometers port 3.3V Power Out 3.3V Output
A_ADC1 Analog In Treble control
A_ADC2 Analog In Midrange control
A_ADC3 Analog In

Bass control

A_ADC0 Analog In Gain control
GND -  
Audio Input GND -  
ADC1 Analog In Right channel
ADC0 Analog In Left Channel
Audio Out1 GND -  
DAC0 Analog Out Left Channel
DAC1 Analog Out Right channel
Audio Out2 GND -  
DAC2 Analog Out Left Channel
DAC3 Analog Out Right channel
Tinysine AMP sub control Port Line Out0 Analog Out DAC0
Line In0 Analog In ADC0
GND -  
GND -  

 

Warning: You need to disconnect the soldering pads on the board back side when you connect external potentiometers. Or the ADC port may be burned. Potentiometers value: 1Kohm-100Kohm.

Here is our Potentiometer Kit

 

TSA1701 control our 2.1 channel amplifier board subwoofer channel

TSA1701 works with stereo amplifier board

 

Features:

  • Size: 7.2cm x 5cm
  • 28-/56-bit, 50 MIPS Digital Audio Processor
  • Audio out output level: 0.9Vrms
  • Audio input signal range: 2Vrms
  • Input resistance: 20Kohm
  • Fully Programmable with SigmaStudio Graphical tool
  • 5V micro USB or DC9-30V Power input
  • 4 pins cable included

 

Documents:

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By Tinyos
Tinysine (Tinyos) Electronics © 2024